• Epoxy Resin Laboratory Fume Hood , 300W Chemical Fume Cupboard
  • Epoxy Resin Laboratory Fume Hood , 300W Chemical Fume Cupboard
Epoxy Resin Laboratory Fume Hood , 300W Chemical Fume Cupboard

Epoxy Resin Laboratory Fume Hood , 300W Chemical Fume Cupboard

Product Details:

Place of Origin: CHINA
Brand Name: hongde
Certification: ISO9001
Model Number: fume hood

Payment & Shipping Terms:

Minimum Order Quantity: 20set
Price: $100-$300/m
Packaging Details: pallet
Supply Ability: 500m/day
Get Best Price Contact Now

Detail Information

Cabinet: PP Cold Roll Steel Worktop: Chemical Resistant Laminate
Deal With: Coated With Epoxy Resin Powder Worktop Color: Grey Black Green
Standard Size: 1200/1500/1800*850*2350MM Power Supply: 110/220V±10%, 50/60Hz
Color: Customization Feature: Chemical Resistant
High Light:

Epoxy Resin Laboratory Fume Hood

,

300W Laboratory Fume Hood

,

300W chemical fume cupboard

Product Description

Chemical Laboratory Fume Hood Lab Fumehood Exhaust Fume Cupboard
 
  The fume hood should have the following functions


  1. Release function: It should be equipped with a mechanism to absorb harmful gas generated inside the fume hood by absorbing the gas

 

outside the cabinet to dilute it and remove it outside. Isolation function: In front of the fume hood, there should be a non-sliding glass window to

 

separate the inside and outside of the fume hood. Heat resistance and acid and alkali corrosion resistance: Some of the fume hoods must be

 

equipped with electric furnaces, and some experiments produce a large amount of acid and alkali and other toxic and harmful gases, which are

 

extremely corrosive. The countertops, liners, side panels, and the selected water nozzles and air nozzles of the fume hood should have anti-

 

corrosion functions. Where strong acids such as sulfuric acid, nitric acid, etc. are used in the semiconductor industry or corrosive experiments, the

 

overall material of the fume hood must be acid-proof and must be made of stainless steel or PVC.


  2. Non-reverse flow function: The airflow generated by the exhaust fan inside the fume hood should have the function of preventing harmful gas

 

from flowing into the room from the inside of the fume hood. In order to ensure the realization of this function, it is a method to connect a fume

 

hood and a ventilator with a single pipe. It cannot be connected by a single pipe. It is also limited to the same room on the same floor and can be

 

connected in parallel. The ventilator should be installed in the pipe as much as possible. At the end (or at the top of the layer).

 


  3. Supplementary function: There should be a passage or alternative device for sucking in air from outside the fume hood when exhausting

 

harmful gases.


4. Wind speed control function: In order to prevent harmful gases from escaping in the fume hood, a certain suction speed is required. The factors

 

that determine the inhalation speed of the air in the fume hood are: the heat generated by the experiment content and the relationship with the

 

number of air changes. The main ones are the content of the experiment and the nature of the harmful substance. It is generally stipulated that

 

the general non-toxic pollutant is 0.25-0.38m/s, the toxic or dangerous hazardous substance is 0.4-0.5 m/s, the highly toxic or has a small amount

 

of radioactivity is 0.5-0.6m/s, and the gas is 0.5m/s, granular material is 1m/s. In order to ensure such a wind speed, the exhaust fan should have

 

the necessary static pressure, that is, the frictional resistance when the air passes through the ventilation duct. When determining the wind speed,

 

you must also pay attention to the noise problem. When the air flows through the pipe, the limit is 7-10m. Noise will be generated if the air is over

 

10m. Usually the laboratory (indoor background noise level) noise limit value is 70dBA. Reducing the wind speed also reduces the noise

 

. Considering the cost and construction of the pipeline, the power of the pipeline and the exhaust fan must be carefully selected


 

Work Surface Height 850mm
Max Opening 820mm
Air Velocity 0.4~0.6m/s
Noise ≤65dB
Gas-collecting hood Conical necking type
Blower Outer centrifugal blower; Speed adjustable.
Front Window Manual, 5mm toughened glass, height adjustable .
Power Supply 110/220V±10%, 50/60Hz
Consumption 300W
Material Main Body Made of Porcelain white PP, thickness 8mm, resistant to strong acid, alkali and anti-corrosion
Work Table Made of Porcelain white PP(Standard Accessory),bending designed to avoid spilling over. Options for solid physiochemical board or epoxy resin board or ceramic board.
Standard Accessory Fluorescent lamp*1, Base stand
Splash-proof sockets*4, Porcelain white PP work table
3 Circuit control boards(each for fluorescent lamp, LCD operation panel and for general on/off control)
Optional Accessory Blower, Remote control valve,Water&gas tap, Water sink, Solid physiochemical board, epoxy resin board or ceramic board.


You can also send the size of the room to us. We will design the design for you
Epoxy Resin Laboratory Fume Hood , 300W Chemical Fume Cupboard 0
 
 
 
 
 
 
 
 
 
 

Want to Know more details about this product
I am interested in Epoxy Resin Laboratory Fume Hood , 300W Chemical Fume Cupboard could you send me more details such as type, size, quantity, material, etc.
Thanks!
Waiting for your reply.